Dodge 2012 Charger Owner'S Manual Download Page 471

Page: 471 / 594

NOTE:

Passengers should not remain in the vehicle

when the vehicle is being jacked.

Jacking And Changing A Tire

WARNING!

Carefully follow these tire changing warnings to
help prevent personal injury or damage to your
vehicle:

•

Always park on a firm, level surface as far from
the edge of the roadway as possible before raising
the vehicle.

•

Turn on the Hazard Warning flasher.

•

Block the wheel diagonally opposite the wheel to
be raised.

•

Set the parking brake firmly and set an automatic
transmission in PARK; a manual transmission in
REVERSE.

(Continued)

WARNING! (Continued)

•

Never start or run the engine with the vehicle on a
jack.

•

Do not let anyone sit in the vehicle when it is on a
jack.

•

Do not get under the vehicle when it is on a jack.

•

Only use the jack in the positions indicated and
for lifting this vehicle during a tire change.

•

If working on or near a roadway, be extremely
careful of motor traffic.

Jack Warning Label

WHAT TO DO IN EMERGENCIES

469

Summary of Contents for 2012 Charger



















































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 Charger

Reviews:

Related manuals for 2012 Charger

Brands by name

Popular brands

Dodge 2012 Charger, Owner'S Manual

Search results

Summary of Contents for 2012 Charger

Reviews:

Related manuals for 2012 Charger

Brands by name

Popular brands