Dodge 2012 Charger Owner'S Manual Download Page 264

Page: 264 / 594

2. Press and hold the desired HomeLink

威

button until

the indicator light begins to flash after 20 seconds.

Do not

release the button.

Without releasing the button

proceed with “Program-

ming A Rolling Code” Step 2 and follow all remaining
steps.

Programming A Non-Rolling Code

For programming Garage Door Openers manufactured
before 1995.

1. Turn the ignition switch to the ON/RUN position.

2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm)
away from the HomeLink

威

button you wish to program

while keeping the HomeLink

威

indicator light in view.

3. Simultaneously press and hold both the Homelink

威

button you want to program and the hand-held transmit-
ter button.

4. Continue to hold both buttons and observe the indi-
cator light. The Homelink

威

indicator will flash slowly

and then rapidly after Homelink

威

has received the fre-

quency signal from the hand-held transmitter. Release
both buttons after the indicator light changes from slow
to rapid.

5. Press and hold the programmed HomeLink

威

button

and observe the indicator light.

•

If the indicator light stays on constantly, program-
ming is complete and the garage door/device
should activate when the HomeLink

威

button is

pressed.

•

To program the two remaining HomeLink

威

buttons,

repeat each step for each remaining button. DO
NOT erase the channels.

262

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 2012 Charger



















































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 Charger

Reviews:

Related manuals for 2012 Charger

Brands by name

Popular brands

Dodge 2012 Charger, Owner'S Manual

Search results

Summary of Contents for 2012 Charger

Reviews:

Related manuals for 2012 Charger

Brands by name

Popular brands