Home
/
Dodge
/
2012 Charger
/
Owner'S Manual

Dodge 2012 Charger, Owner'S Manual, Page: 242 / 594

Share

Page: 242 / 594

Dodge 2012 Charger Owner'S Manual Download Page 242

distance to the lane-changing vehicle. Always be atten-
tive and ready to apply the brakes if necessary.

Narrow Vehicles

Some narrow vehicles traveling near the outer edges of
the lane or edging into the lane are not detected until they
have moved fully into the lane. There will not be suffi-
cient distance to the vehicle ahead.

Stationary Objects And Vehicles

ACC does not react to stationary objects and stationary
vehicles. For example, ACC will not react in situations
where the vehicle you are following exits your lane and
the vehicle ahead is stopped in your lane. Always be
attentive and ready to apply the brakes if necessary.

240

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

«
...
240
241
242
243
244
...
»

Summary of Contents for 2012 Charger



















































































































































































































































































































































































































































































































































































































Reviews:

No comments