2
.
LOADING AND UNLOADING OF THE MACHINE
For transport, place a pallet at the machine
base and lift it with a fork lift. If a pallet is not
available, the lift truck must be provided with
at least 1.2 m long forks suitable, by paying
attention that they lean on points
8 fig. 1
If
the machine is hoisted by a crane, use to the
suitable rings
E
: open upper protection
4 fig.
1,
loose nuts
B fig. 2
, lift rings
E
, insert a bar
into holes (at least 130 cm long and max Ø 4
cm), join the crane hooks to the bar. At the
end of this operation, fasten ring
E
again. Do
not solder the machine structure together with
the base permanently for any reason!
Page 2
fig. 3
fig. 4
WARNING:
never move abruptly or bump stainless steel parts with the forks of the lift
truck.
WARNING:
the machine must operate on the horizontal plane, as is indicated in the
stickers on the machine itself: open upper protection
4 fig. 1,
rest the water level to the stay
rod
A
, adjust supporting feet until the best position is reached.
fig. 2
E
A
B
Before lifting, ensure that the structure is balanced!
Never stand under the suspended load when lifting, transporting or unloading the machine!
Do not make sudden manoeuvres, or knock the steel parts with the forks of the lift truck.
Never leave a suspended load unsupervised!
Summary of Contents for SEPARATOR 2000
Page 23: ...Page 18...