Page 3
fig. 5
DODA is in no way responsible for any electric connection. (please follow the instructions
on the motor plate and on the sticker showing the rotation direction).
3) Before starting the machine, check that the rotating driving parts are suitably protected,
as foreseen by their manufacturer.
4) If the protection of a rotating component is not provided, the user has to supply the
machine with it in conformity with the provisions of the law.
5) DODA takes no responsibility for modifications which could alter the characteristics of
the machine bought.
6) DODA machines must not be installed on structures which are not in conformity with
EC safety regulations foreseen by the Community Directives.
7) Before operating the machine it is indispensable to read carefully all directions in the
“
Use and Maintenance”
manual. In particular, be sure to have completely understood
the machine functioning.
8) The machine has been designed and manufactured for the treatment of water and slurry,
but not of chemical products. Therefore if these substances are treated with our ma-
chine, it could be damaged permanently.
The reduction gear is self-lubricating and there-
fore no maintenance is necessary. The pistons’ hy-
draulic system needs no maintenance as well. If
the hand of the pressure gauge
C
fig. 15
is often
lower than the 4.5
MPa foreseen, that means there
are leaks. To bring pressure back to the correct
working level: insert lever
D fig. 15
into its spe-
cial housing, pump until hand reaches 4.5
MPa
Tank
A fig. 15
contains 3 kg of oil. In case of fault
contact dealer.
Loading pressure must never be higher than
0,3
MPa at separator input.
4. PRELIMINARY CHECKS
The DODA separator can also be supplied with other products, such as tomatoes and
potatoes. Please contact manufacturer for any other employment.
1) Check that no component has been damaged during transport, in this case contact
immediately your dealer .
2) The power supply connection has to be carried out only by skilled workers and
according to DODA instructions (by connecting the cables of the electric motor to
the power supply or the pump to the tractor by means of the cardan shaft).
3. GENERAL INSTRUCTIONS
Summary of Contents for SEPARATOR 2000
Page 23: ...Page 18...
