Page 10
If the machine is not provided with a level probe
on the feeding pump, allowing to
start and stop the machine automatically, proceed as follows:
- turn main switch
U fig. 6
to
One
- turn knob
O
to “Automatic”
- start feeding pump
- when the non homogeneous wasted reaches the sensor inside the loading tank, the separa-
tor starts up.
- to stop the plant, turn knob
O fig. 6
in central position
- stop the pump
turn knob
O
to Manual again: the liquid manure emptying and the machine washing cycles
will start up.
Fig. 16
PRODUCT QUALITY
To obtain a more or less solid separated product, operate the hydraulic pump
A fig. 15
reg-
ulating the pressure of the two pistons
B fig. 15
.
The working pressure, reported on pressure gauge
C
, may range between 45 and 50 MPa
(or 700 and 800 PSI). This hydraulic pump is endowed with a compensating device keep-
ing oil pressure constant.
To increase pressure insert lever
D
into its housing and pump oil manually
fig. 15.
To reduce oil pressure unscrew knob
F
.
If separator is not utilised for a long period remove pressure from pistons.
To introduce oil, unscrew plug
G
and top up. Max capacity 3 Kg.
L
I
H
Summary of Contents for SEPARATOR 2000
Page 23: ...Page 18...
