5. POSITIONING AND TRANSPORT
Before positioning the
Separator
arrange the proper structure on the tank edge.
The machine has to work in a horizontal position: open upper protection
4 fig. 1,
put a wa-
ter level on the stay rod
A fig. 2
, adjust support feet
7 fig. 1
until the correct position is
reached.
The height of the plane, on which the feeding pump is set, has to be suitable for its head,
considering the loss of pressure due to friction due to the feeding pipe. A correct height of
the pipe prevents excessive accumulation of solid materials close to the machine. This as-
sures a better collection of the separated solid product with big sized machines (scrapers,
shovels, etc.).
1)
Open electric board
fig. 6
and connect the electric
supply cables in the suitable terminal board
W fig.
7.
Check the main voltage inside switchboard (220
Volt only 3 phase or 380 Volt only 2 phase)
fig.
5
.It has to be suitable for the switchboard voltage.
2)
To check if the rotation direction of the electric
motor is correct, keep "Manual- Automatic" knob
O
turned on manual position.
3)
Turn the main switch
U
knob from
zero
position
to
one
fig. 6
only for one second, then put it
again to zero (check if the rotation direction of the
electric motor is correct: see sticker on the back).
To avoid any damage to the machine efficiency,
the motor must never rotate in the wrong direction
for longer than two seconds.
O
) "Manual - Automatic" knob.
P
) Pump indicator lamp.
Q
) Separator indicator lamp.
R
) Washing indicator lamp.
S
) Overheating indicator light
U
) Main switch.
V
) Timer.
Z
) Heat regulator switch
W
) Supply terminal board.
fig. 7
fig. 6
Page 4
O
P
Q
R
S
U
V
Z
W
Summary of Contents for SEPARATOR 2000
Page 23: ...Page 18...
