pag. 7
HIGH PRESSURE WASHING PLANT:
High pressure washing plant consists of 2 circuits
with nozzles positioned inside the separa-
tor that through an external high pressure pump wash the area of the brush and the loading
tank.
The 2 circuits have at the entry a solenoid valve to perform separate washing cycles through
a single pump (pict. 13).
Each nozzle is completely adjustable to allow you to wash the necessary points with abso-
lute precision (pict. 14).
It is advisable, to have an effectiveness in the washing, to use a pump able to reach a
minimum pressure of 90 bar and a minimum flow of 40 l/min.
It is advisable, especially in areas with frost risk, to install a drainage valve that allows to empty the
washing circuit at the end of the cycle.
It is essential to install a suitable filter able to intercept solid particles in suspension possibly present
in the water.
fig. 13
fig. 14
High pressure inlet valve
Adjustable nozzle
Page 8
Summary of Contents for SEPARATOR 2000
Page 23: ...Page 18...
