7. OPERATING AND SAFETY RULES
1) During machine inspections, both during working phases and inspection ones, wear
always proper clothing (overalls, gloves, helmet, accident prevention shoes, fastened
clothes, etc.)
2) The machine has always to be used in a well lit place.
3) Since gases released by non homogeneous wasted are poisonous, check that:
- the work area is adequately ventilated;
- the machine is not used near in to flames.
4) Never inspect the liquid manure tank alone. If you loose your balance or if you feel
faint due to fumes, ask for help immediately.
5) If you do not need to work in a tank, cover it.
6) The machine must be operated by accountable adults, while the place must not be ac-
cessible to children.
7) Do not carry out operations or adjustments when the machine is in motion or when it
is connected to supply.
8) The machine has to be employed only if all necessary protections are correctly posi-
tioned, by following instructions indicated in the previous paragraphs to avoid possi-
ble contact with moving parts. Do not damage or remove those protections.
9) The machine can be set in motion only if it has already been filled up with oil (driving
pipes and gearbox).
10) Before starting work phases, be sure that the whole assembly is stable (machine and
tractor).
11) During maintenance be sure that the machine is perfectly standing and disconnected
from supply.
12) The trolley must not be used for road-transportation (if foreseen).
13) During operation, maintenance or adjustment, the rubber parts of the machine
(gaskets, etc.) have not to come into contact with oil, grease or oil derivatives.
14) Be sure that motor rotation is clockwise as indicated by the arrow on the motor (when
foreseen).
15) As regards machines provided with electrical supply, the connection has to be carried
out in a place protected from atmospheric precipitation.
16) If the delivery pipe is connected to pipes or hoses, check that the suitable fastening
joints are in perfect conditions; do not stop near them: hazard of bursting and tearing.
17) Work and keep the machine in a dry area, protected from atmospheric precipitation if
it is not used for a long time.
18) Do not go too close to front chute (detail 2 page 1) during machine work phases, to
avoid accidents.
19) Be sure that the machine is not placed on a inclined plane.
20) Do not climb over or lean out of separator screens; do not use ladders or similar tool
on machine platforms
.
Page 11
Summary of Contents for SEPARATOR 2000
Page 23: ...Page 18...
