Page 7
In both cases, if washing has not been satisfactory restart it simply by turning the “Manual/
Automatic” knob
O fig. 6
on Manual position - with only one shift.
WARNING:
If you want repeat the washing, reset temporarily the first timer to prevent
the machine works in vain .
Time-schedule is directly indicated on timers
V fig. 7
. Following figure
13
, after the feed-
ing pump has stopped, the separator will go on working for ten seconds more (first timer);
then washing will come into operation for eight minutes (second timer).
- Check the pump rotation way and the degree of over heat protection (absorbed amper-
age). Then regulate the device illustrated in figure
14
(also see
Z fig. 7
) based on absorp-
tion of the feeding pump motor as well as on the separator motor.
- Position chopping pump feeding the separator in such a way that the pump body lies
15/20 cm far from the tank bottom.
- Regulate the feeding delivery of the pump to obtain a capacity adequate to the machine
working speed.
Before starting machine, control hydraulic pump pressure gauge
C fig. 15
, and check that
pistons
B fig. 15
are under pressure.
For further information, see "Product Quality".
Summary of Contents for SEPARATOR 2000
Page 23: ...Page 18...
