Before using the terminal
29
✔
INFORMATION
・
When handling docomo nano UIM card, take care not to
touch or scratch the IC. Also, be aware that trying to insert or
remove the docomo nano UIM card using excessive force
may cause it to break.
・
For removing/inserting the tray from/into the docomo nano
UIM card slot, do not remove or insert forcibly. Doing so may
damage the tray.
・
IMEI sheet with IMEI number and bar code printed is inserted
under the docomo nano UIM card slot. Do not pull out the
IMEI plate because it will be requested at a DOCOMO-
specified repair office when the terminal is damaged etc.
Also, please note the following.
- If you pull out the IMEI sheet accidentally, insert it.
- Do not pull out the IMEI sheet forcibly because it may cause
damage.
- If you lost the IMEI sheet, repairs may be refused.
◆
Security code for the docomo nano
UIM card
You can set up a security code called a PIN code for your
docomo nano UIM card. At the time of subscription, the code
is set to "0000", which you can change by yourself.
→
P127
❖
Precautions on charging
・
If you use applications while charging, it may take time to
complete charging or charging may not complete due to
drop-off of battery. To finish charging, end applications
beforehand.
・
It is normal for the terminal or AC adapter to become warm
while charging. When the terminal becomes warm, charging
may stop temporarily for the safety. When the terminal
becomes extremely hot, stop using immediately.
・
If the temperature of the internal battery or the terminal
becomes out of range for charging, a charging error is
notified and the indicator LED blinks or turns off. Wait until
the temperature is dropped and then retry charging.
・
If charging takes for very long time, a charging error is
notified and the indicator LED turns off. Remove the
terminal from the charger and retry.
・
When power voltage of the internal battery is abnormal,
charging error occurs and the indicator LED flashes.
Immediately exit any applications you might be using.
Remove the terminal from the charger and charge it again in
the proper manner. If you still fail to charge the terminal
properly, remove it from the charger, turn off the power,
then contact "Repairs" on the last page of this manual (in
Japanese only) or a DOCOMO-specified repair office.
・
When charging starts with the battery empty, the terminal
may not be immediately activated after turning the power
ON. In this case, charge the terminal while keeping it turned
OFF, and turn it ON after a while.
・
For charging time, see "Main specifications"
→
P165
Charging