Before using the terminal
27
f
In-camera
g
Bluetooth/Wi-Fi antenna section
*1
h
Display (Touch panel)
i
Xi/FOMA antenna
*1
j
Fingerprint sensor
Set the fingerprint operation or unlocking screen locks,
power on/off and set/cancel sleep mode.
k
Charging jack
l
Strap hole
m
External connection jack/slot cap
*3
n
mark
o
Out-camera
p
Flash/Light
q
Back side microphone
Use for reducing noise during a call. Do not cover it.
r
Slot cap
*3
s
Stereo earphone jack (waterproof)
t
Microphone
u
External connection jack
Use for charging, PC connection, etc.
v
microSD card slot
w
docomo nano UIM card slot
x
Power key
P
Power on/off and set/cancel sleep mode.
y
Volume key
Adjust sound volume, or set/cancel Manner mode by
pressing and holding volume down key for 1 second or
more.
*1
It is built-in the terminal. Covering around the antenna by the hand
may affect the quality.
*2
Putting a protective sheet or sticker on the sensor or covering the
sensor with fingers may cause erroneous operation or incorrect
sensing result.
*3
Close the caps firmly to prevent water or dust from entering the
terminal.
A docomo nano UIM card is an IC card that stores user
information, such as the users phone number.
・
You can use the terminal only with a docomo nano UIM
card. If you have a docomo mini UIM card, UIM, or FOMA
card, bring it to a docomo Shop to replace it with a docomo
nano UIM card.
・
If docomo nano UIM card is not inserted to the terminal,
some functions such as making/receiving calls and sending/
receiving SMS are not available.
・
For details on the docomo nano UIM card, refer to the
docomo nano UIM card manual.
docomo nano UIM card