Docomo FOMA SO902I, User Manual

Page: 342 / 372

340
Appendix/External Device Interface/T
roubleshooting
Connection failed (562)
• Failed to connect to the i-mode
center. Move to a location with
better radio wave condition and
retry the operation.
Connection interrupted
• Failed to obtain the i-mode data.
Retry to obtain it.
Content length exceeds maximum
size for i-motion
• Failed to retrieve the data be-
cause its volume has exceeded
the maximum size.
Content length exceeds replayable
size for i-motion
• Failed to retrieve the data be-
cause its volume has exceeded
the maximum size.
Continue using XXX (i-
α
ppli name)
and transmit data?
• The number of times of commu-
nications has increased signifi-
cantly within a certain period of
time during running the i-
α
ppli
software.
Could not move
• Failed to move data because of
error occurrence.
Could not read
• An error occurred while reading
data from the FOMA terminal
memory.
Could not save
• Failed to save the image.
• Failed to save the i-
α
ppli software.
• Failed to save to the “Memory
Stick Duo”.
• Failed to receive data during the
infrared communications or data
communications with a PC.
• Failed to save the image or melody
scanned by the bar code reader.
D
Data in IC-card is full. Unable to
download
• Failed to download the data be-
cause the IC card is full of data.
Data is wrong
• Failed to play back music or im-
age data included in the QR code
because it is invalid.
Data transmission is frequent.
Continue transmission?
• The number of times of commu-
nications has increased signifi-
cantly within a certain period of
time during running the i-
α
ppli
software.
Dictionary data was found error
• Some words failed to be saved
because of an error in part of the
dictionary data (successfully
saved words can be used as the
dictionary data).
Download failed
• Failed to download because of
error occurrence.
E
Error in image. Does not work
correctly
• The Flash movie cannot be
played back due to memory
shortage, etc.
Error in IC card data
• Failed to operate because data in
the IC card contains an error.
F
Final number exists
• The “Memory Stick Duo” contains
a file with the maximum number
(999-9999), so no more files can
be saved in it. Perform the Reset
file No. or delete the images from
the largest file numbers (P.144,
251).
I
ppli stand-by display terminated
due to security error
• The i-
α
ppli stand-by display was
canceled since it has attempted
an unauthorized operation. Check
the security error history (P.226).
i-mode Center is busy. Please try
again later (555)
• Any trouble on communication
line equipment or extreme line
congestion is encountered. Retry
after a while.
i-mode mail service is busy. Please
try again later (553)
• The line is extremely congested.
Wait for a while and then retry the
operation.
Input error (205)
• Incorrect input data. Check the
input contents.
Invalid Chara-den data
• Failed to download or save
Chara-den data because it con-
tains an error.
Invalid data (XXX)
• You tried to connect to the site,
etc. not supporting i-mode.
• The URL you entered may be in-
valid.
• Failed to display because of an
error in the received data.
Invalid data. Connection cannot be
established (400)
• The host number you set for the
Host selection is incorrect. Re-
store the host number to “i
モー
ド ”, the default setting at the time
of purchase (P.171).
• Failed to connect to i-mode for
some reason. Retry to connect
(P.155).
Invalid data. Data size is not sup-
ported (413)
• You tried to connect to the site,
etc. not supporting i-mode.
• The URL you entered may be in-
valid.
Invalid melody data
• Failed to download or save
melody data because it contains
an error.
Er
ro
r messages
＊ To use the “Memory Stick Duo”, you need to obtain it separately (P.245).