Docomo FOMA SO902I, User Manual

Page: 90 / 372

88
Phonebook
7
Enter a phone number at [ ].
Up to three entries are available. Enter each entry within 26 digits.
• You can save the pause (P), timer (T), “+”, “#”, and sub-address separator ( ).
• If a phone number is saved with the “184” or “186” prefix, SMS cannot be sent to this phone number even
if you select it.
8
Select a phone number type icon at [ ].
When entering a phone number, [ Public] is automatically entered.
9
Enter a mail address at [ ].
Up to three entries are available. Enter each entry within 50 half-width alphanumeric characters.
• When sending mail to an i-mode terminal (including Mova), you need to specify only the mail address
portion before the @ mark.
10
Select a mail address type icon at [ ].
When you enter a mail address, [ Mobile1] is automatically entered.
11
Enter the Secret code for the mail address at [ ].
Enter the specified Secret code (P.184) when the recipient saves it. The Secret code is used
when sending mail.
• When you save a mail address as “phone Secret code@docomo.ne.jp” in the Phonebook, if you
save a Secret code, you cannot send mail or reply mail to this address. To avoid this problem, change the
mail address to “phone number@docomo.ne.jp” and save a Secret code.
• The Secret code is masked by “ ”. Only when the Secret display is set to [ON], it is displayed in
numbers.
12
Enter a postal code at [ ].
Enter a code within seven half-width digits.
13
Enter a postal address at [ ].
Enter an address within 64 full-width or 128 half-width characters.
14
Enter a birthday at [ ].
Enter a date within the range from 1900/01/01 to 2050/12/31.
15
Select an image for the Call image from My picture of the Data box at [ ].
Select or shoot a call image to be displayed when placing/receiving a call, right after receiving
mail and when displaying the individual Phonebook entry.
• You can set a GIF or JPEG image not exceeding 100K bytes in file size and [Stby(320 × 240)] in image
size.
• It may take time to display an image large in size.
To switch on the camera to record a still image
Select [Camera] and record an image (P.132).
• You can record a still image with an image size of less than or equal to [Stby(320 × 240)].
To specify no image
Select [None]. The image saved in the Group setting appears when placing/receiving a call
and right after receiving mail. If no image is saved in the Group setting, the image set in the
Animation setting (P.106) or Incoming set (P.99) appears.
To check the image
Move the cursor to an image and press (Play).
Add to FOMA ter
minal phonebook