Docomo FOMA SO902I, User Manual

Page: 288 / 372

286
Data Communications
Preparations and Flow of Data
Communications
The preparations required for performing packet and 64K
data communications by connecting the FOMA terminal
to a PC are given below.
■ Operating environment of communication configuration
files (drivers)/FOMA PC setup software
※
1 USB port (USB specification 1.1/2.0-compliant) is required.
※ 2 The required memory and hard drive capacity constitute the
operating environment for the FOMA PC setup software.
These specifications may vary depending on the PC system
configuration.
Connecting the FOMA Terminal
to a PC
Connect the FOMA terminal to a PC when they are
powered ON.
1
Open the external connection terminal cover.
2
Insert the external connection connector of the FOMA
USB connection cable (optional) into the external
connection terminal of the FOMA terminal until it clicks.
3
Connect the USB connector of the FOMA USB
connection cable to the USB terminal of the PC.
The FOMA terminal is connected to the PC and “ ” is displayed
on the FOMA terminal.
1
2
3
■ Disconnecting the USB connection cable
1
Make sure to pull out the FOMA USB connection cable
horizontally while holding the release buttons pressed.
When you remove the USB connection cable, “ ” which is
displayed on the FOMA terminal disappears.
2
Pull out the FOMA USB connection cable from the
USB terminal of the PC.
● Do not remove the FOMA USB connection cable during data
communications. Doing so may cause malfunction, etc.
When you use the
F O M A P C s e t u p
software
Install the FOMA PC setup software (P.289).
Connect the FOMA terminal to a PC (P.286).
Install the communication configuration files (drivers) (P.287).
Check the communication configuration files (drivers) (P.288).
Set a host.
Packet
communications
• “mopera U” or
“mopera”
(P.291)
• Other provider
(P.291)
64K data
communications
• “mopera U” or
“mopera”
(P.292)
• Other provider
(P.292)
Perform communications (P.293).
Start up communications software that is
compatible with AT commands (P.295).
Set a host (P.295).
Set ON/OFF for the Notify caller ID (P.296).
Set up the dial-up network (P.296).
Perform communications (P.300).
When you do not use
the FOMA PC setup
software
Required environment
PC/AT-compatible
Windows 98, Windows Me,
Windows 2000 Professional,
Windows XP (All Japanese versions)
Windows 98, Windows Me: 32MB or more
Windows 2000 Professional: 64MB or more
Windows XP: 128MB or more
5MB or more free space
Item
PC main unit ※ 1
OS
Required memory ※ 2
Hard drive capacity ※ 2
USB connector
Release buttons
Forcibly pulling out the FOMA
USB connection cable may
cause malfunction.
Pr
eparations and flow of data
communications/Connection
External connection terminal
Insert the connector
horizontally with the
label side facing up.
External
connection
connector
FOMA USB
connection cable
USB terminal