Docomo FOMA SO902I, User Manual, Page: 353 / 372

351
Appendix/External Device Interface/T
roubleshooting
Softwar
e update/
Scan function
Confirming the Reservation
1
From the Menu, select [Settings] → [Management] → [SW Update] and press .
The Security code screen appears.
2
Enter the Security code and press (OK).
Ａｌｒｅａｄｙ ｒｅｓｅｒｖｅｄ
ｆｏｒ
２００６／０３／１１ Ｓａｔ
１：０５
ＯＫ
Ｃｈａｎｇｅ
Ｃａｎｃｅｌ
If the software update is already reserved, the reserved information
appears.
To change the reservation
Select [Change] → [OK]. The FOMA terminal connects to the server
and you can select another date/time.
To cancel the reservation
Select [Cancel] → [Yes] → [OK]. The FOMA terminal connects to the
server and cancels the reservation.
Protecting Your Mobile Phone from Harmful Data
At first, update the pattern definitions to get the latest definitions.
You can detect information related to the data and programs loaded into the FOMA terminal
from an external source, such as data downloaded from a site or i-mode mail, and delete
data or end the start-up of application that can cause a trouble.
• Use the pattern definitions for checking. Since the pattern definitions are upgraded every time a new problem is
discovered, be sure to update the definitions (P.352).
• The scanning function provides explicit protection against intrusive data that causes mobile phone trouble while
you are viewing a website or receiving mail. Note that if the pattern definitions corresponding to each trouble are
not downloaded to the mobile phone, or if there are no pattern definitions corresponding to each trouble, this
function cannot prevent the trouble occurrences.
• The contents of the pattern definitions vary depending on the model of your mobile phone. Note that the distribution
of pattern definitions for models released more than three years ago may be discontinued at our company’s
discretion.
Setting the Scanning Function
You can set whether or not to automatically check data and programs when they are
executed.
• The scanning function is set to [Valid] at the time of purchase.
1
From the Menu, select [Settings] → [Management] → [Scan function] → [Set Scan]
and press .
Ｖａｌｉｄ
Ｉｎｖａｌｉｄ
Ｓｅｔ Ｓｃａｎ [Valid] : Execute the scanning function. If data that can cause a trouble is detected,
a warning is displayed in five levels.
[Invalid] : Do not execute the scanning function.
2
Select [Valid] and press .
When you change the setting
Select [Yes].