Docomo FOMA SO902I, User Manual

Page: 289 / 372

287
Data Communications
Installing the Communication
Configuration Files (Drivers)
To connect the FOMA terminal to a PC using the FOMA
USB connection cable (optional) and perform data
communications, install the communication configuration
files (drivers) from the supplied CD-ROM.
When using Windows XP
A user with Administrator privilege can install the software.
1
Set “FOMA SO902i CD-ROM” in the CD-ROM drive
of the PC.
2
Connect the FOMA terminal to the PC using the FOMA
USB connection cable.
The wizard start window appears.
• The wizard start window may not appear on some PCs. In
this case, go to step 4.
3
Select [ いいえ、今回は接続しません ] (No, not this
time) and click [ 次へ ].
4
Select [ 一覧または特定の場所からインストールする
（詳細）
] (Install from a list or specific location (Detail))
and click [ 次へ ].
5
S e l e c t [ 次の場所で最適のドライバを検索する ]
(Search for the best driver in these locations), put a
checkmark for [ 次の場所を含める ] (Include this location
in the search), specify a folder, and click [ 次へ ].
• To specify a folder, click [ 参照 ] and enter [<CD-ROM drive
name>:¥USB Driver¥Win2k_XP]. (The CD-ROM drive name
may be different depending on the PC.)
The installation starts. When the software is installed, the wizard
complete window appears.
6
Click [ 完了 ].
The next driver search window appears.
7
Install all other three drivers.
Continuously install all other three drivers by referring to step
1 to 6.
When the communication configuration files (drivers)
installation is completed, the message
新しいハードウェア
が イン ス ト ール さ れ 、使 用 準 備が で きま し た 。 ( N e w
hardware is installed and the device is working properly) is
displayed for several seconds.
When using Windows 2000 Professional
A user with Administrator privilege can install the software.
1
Set “FOMA SO902i CD-ROM” in the CD-ROM drive
of the PC.
2
Connect the FOMA terminal to the PC using the FOMA
USB connection cable.
The wizard start window appears.
3
Click [ 次へ ].
4
Select [ デバイスに最適なドライバを検索する （推奨） ]
(Search for the best driver in these locations
(Recommended)) and click [ 次へ ].
• [USB DEVICE] may appear on some PCs.
5
Select [ 場所を指定 ] (Specify a folder) and click [ 次へ ].
6
Specify a folder and click [OK].
• To specify a folder, click [ 参照 ] and enter [<CD-ROM drive
name>:¥USB Driver¥Win2k_XP]. (The CD-ROM drive name
may be different depending on the PC.)
7
Check the driver name and click [
次へ
].
In this example, [FOMA SO902i] appears.
The installation starts. When the software is installed, the wizard
complete window appears.
8
Click [
完了
].
The next driver search window appears.
9
Install all other three drivers.
Continuously install all other three drivers by referring to step
1 to 8.
When using Windows Me
1
Set “FOMA SO902i CD-ROM” in the CD-ROM drive
of the PC.
2
Connect the FOMA terminal to the PC using the FOMA
USB connection cable.
The wizard start window appears.
3
Select [
ドライバの場所を指定する （詳しい知識のある
方向け） ] (Specify location of the driver (Advanced))
and click [
次へ
].
Communication configuration files