Docomo FOMA SO902I, User Manual

Page: 192 / 372

190
Mail
Compose and send mail
● If the number of saved draft mail has reached 50 or there is not enough free space left for draft mail, you
cannot compose new mail nor edit draft mail.
● If new mail is sent when the number of saved sent mail has reached 500 or there is not enough free space, the
unprotected sent mail is overwritten from the oldest.
● If mail you send to several addresses is sent successfully to some and unsuccessfully to other addresses, the
same mail is saved in [Outbox] as sent mail and in [Draft] as unsent mail/mail sent unsuccessfully.
●
Even if the mail is sent successfully, you may receive the error message “Transmission failed” depending on
the radio wave condition and the mail is saved in [Draft].
Adding an Address
You can send i-mode mail containing the same information to a maximum of five addresses
all at once by adding these addresses. You can select the type of address from To, Cc, and
Bcc.
1
Press (Func) in the Edit mail display.
The Function menu appears.
2
Select [Add receiver]
→
address type (To/Cc/Bcc) and press .
The address field of the selected address type ([ ]/[ ]/[ ]) is added.
3
Enter an address in the added address field [ ]/[ ]/[ ].
To delete an address
Move the cursor to an address and from the Function menu, select [Delete receiver]
→
[Yes].
To change the address type
Move the cursor to an address and from the Function menu, select [Change addr type]
→
an address type (To/Cc/Bcc).
4
Compose mail and send it.
• Follow the same steps as in the Compose and send mail (P.189, step 3 to 5).
● The mail addresses entered in To and Cc are displayed at the receiving end. Note, however, that they may not
be displayed depending on the terminal, equipment, or mail software of the recipient.
Entering an Address from the Mail List
You can send mail to several recipients saved in the mail list.
1
Press (Func) in the Edit mail display.
The Function menu appears.
2
Select [Mail list] → a mail list and press .
All the members in the list are entered in the address box.
To select a specific address from the mail list
Press (Each) in the Mail list display and select a member.
3
Compose mail and send it.
• Follow the same steps as in the Compose and send mail (P.189, step 3 to 5).