Docomo FOMA SO902I, User Manual, Page: 121 / 372

119
Security Settings
Self mode/PIM lock
Restricting Placing/Receiving Calls
You can disable all functions that involve calls or communications, such as placing/receiving
a voice or videophone call, originating/receiving a PushTalk call, and sending/receiving
mail. You cannot use infrared communications or the infrared remote control, either (Self
mode).
1
From the Menu, select [Settings]
→
[Call]
→
[Self mode] and press .
The screen for confirming Self mode setting appears.
To cancel the Self mode
When the screen for confirming Self mode cancellation appears, select [Yes].
2
Select [Yes] and press .
The Self mode is set and “ ” appears.
● Even if the Self mode is set, you can call emergency numbers (110, 119, and 118). The Self mode is canceled
after you call an emergency number.
●
If there is an incoming call when the Self mode is set, the caller hears a guidance informing that the FOMA
terminal is outside of the service area or the FOMA terminal is powered OFF. When using the DoCoMo Voice
Mail Service or Call Forwarding Service, these services can be used in the same manner as when the FOMA
terminal is powered OFF.
Protecting Your Personal Data in the Phonebook, Schedule, etc.
You can disable the following functions to prevent others from viewing/editing your personal
information such as the Phonebook and Schedule data.
- Camera - Memory Stick - Mail - i-mode
- i-Channel - i-
α
ppli - Own number - Phonebook
- PushTalk phonebook - Record message - Voice memo - Bar code reader
- Infrared communications - ToruCa - IC card content - Alarm
- Schedule - Text memo - Data box - Stand-by display setting
- Icon settings - Animation setting - Ring tone - Incoming image
- Substitute image - Scan function - Software Update - Reset settings
- Delete all data - Multi Number
• When the Reject unknown is set, you cannot set the PIM lock.
1
From the Menu, select [Settings] → [Lock/Security] → [PIM lock] and press .
The Security code screen appears.
2
Enter the Security code and press (OK).
3
Select [ON] → [Yes] and press .
The Redial/Received record and Send/Receive ranking data are deleted,
the PIM lock is set, and “
” appears.