Docomo FOMA SO902I, User Manual

Page: 296 / 372

294
Data Communications
W-TCP Setting
The W-TCP setup software is a “TCP parameter setting”
tool for optimizing the transmission capacity of TCP/IP
when you perform packet communications using the
FOMA network. If you want to make the most of the
communications performance of the FOMA terminal, you
must optimize the communication settings using this
software.
When using Windows XP
You can set optimization for each dial-up connection.
Example: Optimizing the system settings
1
Start the FOMA PC setup software and click [W-TCP
設定
].
To perform the operation from the task tray
Click “ ” in the task tray.
2
Click [ 最適化を行う ].
To cancel optimization
Click [
システム設定
]
→
[
最適化を解除する
].
3
Select the dial-up connection to be optimized and click
[ 実行 ].
The system and dial-up settings are optimized.
4
Restart the PC in accordance with the instructions on
the display.
The system settings are optimized.
When using Windows 2000 Professional/
Windows Me/Windows 98
Example: Optimizing the system settings
1
Start the FOMA PC setup software and click [W-TCP
設定 ].
To perform the operation from the task tray
Click “ ” in the task tray.
2
Click [
最適化を行う
].
To cancel optimization
Click [ 最適化を解除する ].
3
Restart the PC in accordance with the instructions on
the display.
The system settings are optimized.
Host (APN) Setting
You can set a host (APN) for packet communications.
Connect the FOMA terminal to a PC before starting this
operation.
1
Start the FOMA PC setup software and click [
接続先
(APN) 設定 ].
2
Click [OK].
The host (APN) is loaded from the FOMA terminal. Wait for a
few moments.
3
Set a host (APN).
To add a host (APN)
Click [ 追加 ].
To edit (change) a host (APN)
Click [
編集
].
To delete a host (APN)
Select a host (APN) and click [ 削除 ].
• You cannot delete a host (APN) saved as [cid1] and
[cid3]. (Even if you select [cid3] and click [ 削除 ], it is
not actually deleted. The operation is returned to
[mopera.net].)
To save data in a file
Click the [ ファイル ] menu → [ 上書き保存 ]/[ 名前を付けて
保存 ].
To read data from a file
Click the [ ファイル ] menu → [ 開く ] and select a saved
file.
To read host (APN) data from the FOMA terminal
Click the [
ファイル
] menu
→
[FOMA
端末から設定を取得
].
To write host (APN) data to the FOMA terminal
Click the [ ファイル ] menu → [FOMA 端末へ設定を書き込
む
].
To create dial-up
Select a host (APN) and click [ ダイヤルアップ作成 ]. Set
up a dial-up connection for packet communications in
accordance with the instructions on the display.
●
The host (APN) is information that must be saved in the
FOMA terminal. When you use the PC with a different FOMA
terminal connected, it is required to save it again in the
new FOMA terminal.
● To continue using a host (APN) saved in the PC, save the
registration number (cid) of the same host (APN) in the
FOMA terminal.
● When you use Windows Me or Windows 98 and if the FOMA
terminal is recognized as a number larger than “COM20”,
you may not read or write host (APN) data from/to the FOMA
terminal in the host (APN) setting. In this case, use the
Windows standard “Hyper Terminal” to perform the settings.
Communications using FOMA PC setup softwar
e