Docomo FOMA SO902I, User Manual, Page: 173 / 372

171
i-mode/i-motion
Changing the i-mode Host (ISP Connection Communication)
※
You do not need to change the Host setting when using the i-mode service of DoCoMo.
You can set up to 10 hosts for receiving services other than the services provided by
i-mode (DoCoMo). When you change a host to other than [i-mode(UIM)], you cannot use
i-mode.
• You must always enter [Host name], [Host number], and [Host address].
1
From the i-mode menu, select [i-mode setting] → [Common setting] → [Host selection]
and press .
ｉ−ｍｏｄｅ（ＵＩＭ）
Ｈｏｓｔ ｓｅｌｅｃｔｉｏｎ
To edit the host setting
Move the cursor to the host and from the Function menu, select [Edit],
and enter the Security code. Edit each item.
To delete the host
Move the cursor to the host and from the Function menu, select [Delete
one], enter the Security code, and select [Yes].
2
Press (Create).
The Security code screen appears.
3
Enter the Security code and press (OK).
Ｈｏｓｔ ｎａｍｅ
Ｈｏｓｔ ｎｕｍｂｅｒ
Ｈｏｓｔ ａｄｄｒｅｓｓ
Ｈｏｓｔ ａｄｄｒｅｓｓ２
Ｈｏｓｔ ｓｅｔｔｉｎｇ
[Host name] : Enter a host name within eight full-width or 16 half-width characters.
[Host number] : Enter a host number within 99 half-width characters.
[Host address]/[Host address2]
: Enter a host address within 30 half-width characters.
4
Enter each item.
5
Press (Complete).
The entered host is saved.
6
Select the host and press .
The host is changed.
●
Note that packet communications is not covered by the Pake-Houdai service if a host of the packet
communications is set to other than [i-mode(UIM)].
i-mode setting