Docomo FOMA P702iD, Manual, Page: 62 / 522

60
Ma
king/Receiving Calls
Chak
u
-moj
i
2
Enter a message
p You can enter up to 10 characters regardless of whether they are pictographs, symbols, or full-pitch/half-pitch characters.
1
Enter a phone number,
or bring up the detailed display of a Phonebook entry, redial item, dialed call record,
or received call record.
2
( ) Chaku-moji Do the following operations.
3
Press or .
p
Press to make a video-phone call.
p The Chaku-moji message being sent is displayed during dialing.
Make a Call with a Chaku-moji Message
Function menu Operation Explanation
Create message
Enter a message
p You can enter up 10 characters regardless of
whether they are pictographs, symbols, or
full-pitch/half-pitch characters.
You can create a Chaku-moji message just before
dialing.
p The Chaku-moji message created using this
function is not stored in the Message List.
Select message
Select a message
p
When a Chaku-moji message has been set for
sending, the confirmation display appears
asking whether to overwrite it. Select “YES”.
From the Message List, you can select a Chaku-
moji message to be sent.
Sent messages
Select a sent message
p When a Chaku-moji message has been set for
sending, the confirmation display appears
asking whether to overwrite it. Select “YES”.
From the Sent Message List, you can select a
Chaku-moji message to be sent. Up to 10 sent
Chaku-moji messages only are stored in the Sent
Message List. If you send the same Chaku-moji
message, the older one is deleted.
Information
p When a Chaku-moji message has arrived at the other party’s phone, “Transmission completed” is displayed, and you are charged a
transmission fee.
p
When a Chaku-moji message has not arrived at the other party’s phone, “Transmission failed” is displayed. In this case, you are not
charged a transmission fee.
･ When the other party’s phone is not a Chaku-moji compatible mobile phone or the call is not allowed by “Message disp. settings” at
the receiving end
p Even if you make a call with a Chaku-moji message attached, the Chaku-moji message is not displayed and you are not charged a
transmission fee (the call is not recorded in Received Calls) when the receiving end has the following settings or is placed in the
following states. Also, the transmission result is not displayed at the sending end.
･ When the other party’s phone is out of the service area, turned off, during Public Mode (Drive Mode), or the ring time for Record
Message is set to zero seconds
p Depending on the radio wave conditions, the transmission result may not be displayed at the sending end even if a Chaku-moji
message has arrived at the other party’s phone. In this case, you are charged a transmission fee.
p
You cannot send Chaku-moji messages to anyone outside Japan.
p When your video-phone call is not connected and automatically switched to a 32K or voice call, the Chaku-moji message is also re-
sent.
p Chaku-moji does not support PushTalk.