Docomo FOMA P702iD, Manual, Page: 283 / 522

281
Ma
il
Mail Member
You can specify a sort condition and folder from the
detailed Sent/Received Mail display.
1
Detailed Sent Mail display/Detailed Received
Mail display ( ) Auto-sort
Do the following operations.
<Send impossible>
p
You can set “Send impossible” for only one folder.
<Sort all>
p You cannot sort SMS reports or SMS messages that have been directly
received in the UIM.
p “Sort all” can be set for only one i-
α
ppli mail folder each in the Inbox and
Outbox.
p When “Sort all” is set, other sort settings are disabled.
<List setting>
p You can switch between “Name” and “Address” also by pressing
from the Auto-sort Setting display.
Auto-sort Storing
Information
Function menu Operation/Explanation
Address sort You can specify mail addresses and phone
numbers to be sorted into a folder from the
sender’s or destination mail address.
Select a folder
p
When multiple addresses are found, select an
address and press
.
Subject sort You can edit the subject of i-mode mail to be
sorted in a folder.
Edit the subject Select a folder
■ To change the condition
The confirmation display appears asking whether to overwrite the condition.
Select “YES” to replace the set condition with a new one.
■ When the same condition is set for another folder
The confirmation display appears asking whether to change.
Select “YES” to release the condition set for another folder and to set for
the selected folder.
p You cannot change the setting for a Mail-Security-activated folder.
■ When specifying another address for the folder set by “ Address
sort ”
The confirmation display appears asking whether to add the address.
Select “YES” to add the address.
You can store mail addresses by group. You can send
mail to regular members in the list.
You can store up to five addresses per group, and up to
20 groups.
1
Mail member
Select a Mail member to be stored
p When a Mail member has any
entry, “ ” appears at the
lower left of the display.
Press (
) to send
i-mode mail to a selected Mail
member.
Go to step 3 on page 250.
2
Select <Not stored> ( )
p If you select a stored mail
address, the Mail Member
Address Confirmation display
appears.
3
Enter a mail address
Repeat step 2 and step 3 to store multiple mail addresses.
p
You can enter up to 50 half-pitch characters.
Mail Member
Creating Mail Member
< >
Mail Member List
Mail Member Address List
Information
p
If you store the same mail address in a Mail member and try to send a
message, the confirmation display appears asking whether to delete
the redundant address and send the mail. Select “YES”.