Docomo FOMA P702iD, Manual, Page: 492 / 522

7
Communication Setting by FOMA PC
Setup Software
STEP1 Install Software
Install the “FOMA PC setup software”.
See page 8 for installation.
If the old-version “FOMA PC setup software” is already installed, you
cannot install the “FOMA PC setup software”, so uninstall it in
advance.
The “FOMA PC setup software” is applicable to all the FOMA phones
that support data communication.
STEP2 Prepare for Setup
Prepare for setup.
Before setup, confirm that the FOMA phone is connected to your
personal computer and correctly recognized by the personal
computer. See page 3 for how to connect the FOMA USB Cable
(option).
If the FOMA phone is not correctly recognized by the personal
computer, you cannot perform settings and communication. See
page 6 for confirming whether the FOMA phone is correctly
recognized by the personal computer.
See page 4 through page 6 for how to install the “P702iD
communication setup files” (driver).
STEP3 Setting Operation
Carry out the appropriate setting for the
communication you use.
Setting the packet communication from “Easy Setting”
When using mopera U or mopera as an access point
................................................................................................... page 10
When using a provider other than mopera U or mopera
...................................................................................................
page 11
Setting the 64K data communication from “Easy Setting”
When using mopera U or mopera as an access point
...................................................................................................
page 13
When using a provider other than mopera U or mopera
................................................................................................... page 13
See page 17 for optimizing the packet communication performance
using W-TCP setup.
See page 18 for setting an access point name (APN).
STEP4 Connection
Connect to the Internet.
To connect the FOMA phone to a personal computer
and perform the packet communication or 64K data
communication, you need to configure various settings
related to the communication. Using the “FOMA PC
setup software”, you can easily carry out the settings
below. If required, you can set the packet
communication and 64K data communication without
using the “FOMA PC setup software”. (See page 19 and
page 28)
The “FOMA PC setup software” is applicable to all the
FOMA phones that support data communication.
FOMA PC Setup Software
■ Easy setting
You can easily carry out “dial-up creation for FOMA data communication”
and “W-TCP setup” by following the guidance.
■ W-TCP setup
Before using “FOMA packet communication”, optimize communication
settings in your personal computer.
To maximize the communication performance, you need to optimize
communication settings using W-TCP setup.
■ Access point name (APN) setting
You can set an access point name (APN) required for packet
communication.
The FOMA packet communication does not use an ordinary phone
number as an access point unlike the 64K data communication.
You need to register an access point name (APN) in the FOMA phone in
advance, and specify the registration number (cid) in the access point
number field for connection.
By the default, “mopera.ne.jp”, the access point name (APN) of mopera,
is registered in cid
※
1, and “mopera.net”, that of mopera U, is registered
in cid
※
3. To connect to another service provider or Intranet LAN,
however, you need to set the access point name (APN).
※ “cid” is the abbreviation of “Context Identifier”, the number for storing
the packet communication access point (APN) to the FOMA phone.
Information
p When the old-version of “FOMA PC setup software” (version 1.0.0,
hereafter referred to old-version FOMA PC setup software) is installed,
uninstall it before installing this “FOMA PC setup software” (version
2.0.1). See page 9 for how to check the version information.
p If the “FOMA PC setup software” for the FOMA phone that was
released before the 702iS series is installed, uninstall it in advance.