Docomo FOMA P702iD, Manual, Page: 458 / 522

456
App
e
nd
ix/Extern
a
l Device Li
nkage/
Troub
leshooting
Softw
are Update
This function is to check whether you need to update the software in the FOMA phone, and if necessary,
download a part of the software for updating using packet communication.
※
You are not charged for packet communication for updating the software.
If you need to update the software, the DoCoMo web page and “ お知らせ (News)” in
i
Menu let you know
about it.
“Update now” and “Reserve Update” are available for updating the software.
【 Update now 】 : If you want to, immediately update.
【
Reserve Update
】
: Reserve the date and time for updating the software, and the software is automatically
updated at the reserved date and time.
p Never remove the battery pack while updating the software. You may fail to update.
p You can update the software with the Phonebook entries, images shot by the camera, or downloaded data retained in the FOMA
phone; however note that data may not be protected depending on the conditions (such as malfunction, damage, or drench)
your FOMA phone is placed in. You are advised to backup important data. (Note that some data such as downloaded ones might
not be backed up.)
p If you fail to update the software, “Rewrite failed” is displayed and you cannot do all the operations. In that case, you are kindly
requested to come to a repair counter specified by DoCoMo.
Software Update
Updating Software
p You can update the software even when you set “Host selection” to a user designated destination.
p
Fully charge the battery before updating the software.
p You cannot update the software in the following cases:
・ When the FOMA phone is off ・ When date and time are not set ・ During a call
・ Out of service area ・ While entering PIN1 code ・ During PIN1 code lock
・ During Lock All ・ During PIM Lock ・ During Self Mode
・ While using other functions ・ When the UIM is not inserted
・
While connecting to external devices such as personal computer
p It may take time to update (download or rewrite) the software.
p If you execute Software Update while PIN1 Code Entry Set is set to “ON”, the PIN1 Code Entry display appears at auto-restart after the
software rewriting is finished. You cannot make or receive calls, or operate communication functions unless you enter the correct PIN1
code.
p
You cannot make/receive calls, use communication functions, and use other functions while updating the software. (You can receive
voice calls, forward calls or operate Record Message during download.)
p When updating, the FOMA phone is connected to the server (DoCoMo site) using SSL communication. You need to validate the SSL
certificate. (Setting at purchase: Valid See page 240 for how to set.)
p It is recommended to update the software when radio wave is strong enough with the three antennas displayed and while you are not
moving.
※
If radio wave conditions get worse while downloading the software, or download is suspended, move to a place with good radio wave
conditions and try again to update the software.
p If you check software update for the software already updated, the message “No update is needed Please continue to use as before” is
displayed.
p
When “Receive option setting” is set to “ON” and mail comes in during software update, the display for notifying you of the arrival of mail
may not be displayed after software update is completed.
p When updating the software, the proper information about your mobile phone (model name or serial number, etc.) is automatically sent
to the server (DoCoMo-managed server for software update). We at DoCoMo never use the sent information for other purposes than for
updating software.
p If the software update is completed without your confirmation, the “Notification icon” of “ ” (Update complete) appears on the
Stand-by display. If there is any of contents you need to confirm, the “ ” icon (Check update) appears.
Select “ ” and enter your Terminal Security Code; then the contents of update result are displayed.
< >