Docomo FOMA P702iD, Manual, Page: 452 / 522

450
App
e
nd
ix/Extern
a
l Device Li
nkage/
Troub
leshooting
Error Me
ssages
Server is busy The line facility has trouble or the line is very busy. Wait a while and try again. –
The line is very busy. Wait a while and try again. –
The server is busy. Wait a while and then try again. –
Server is full (551) The receiving end can receive no more mail. –
Service is not registered You have not subscribed to i-mode. You need to subscribe to i-mode to use it. If you
start using i-mode midway, turn off the FOMA phone and turn it on. P.48
Back page
Service unavailable An error occurred, so you could not operate. –
The function cannot be operated with the inserted UIM. –
Set caller ID to ON The phone number is not notified. Notify your phone number and try again. P.51
Set light time 02 䌾 20 min Set a light time for Backlight to 2 through 20 minutes. P.158
Set mute seconds 01
䌾
99 sec Set a start time for “Ring start time” to 1 through 99 seconds. P.191
Set ring time 000 䌾 120 sec Set a ring time for Record Message, Voice Mail, or Call Forwarding to 0 through 120
seconds. P.81, P.383,
P.385
Set ring time 003 䌾 120 sec Set a ring time for Remote Monitoring to 3 through 120 seconds. P.103
Set ring time 01 䌾 60 sec Set a ring time for “Ring time setting” to 1 through 60 seconds. P.117
Set the other ID. “Other ID” has not been stored, so you could not operate. Store “Other ID” and try
again.
P.103
Set time The clock is not set, so you cannot operate. Set the date and time by “Set time” and
try again.
P.50
Set time to obtain data The clock is not set, so you cannot obtain. Set the date and time by “Set time” and
try again.
P.50
Setting auto assist
Cannot delete International call access codes or country codes set by Auto Assist Setting cannot
be deleted. Change/Cancel the setting and try again.
P.57
Setting auto assist
Cannot delete all
Setting PIM lock PIM Lock is set. Release PIM Lock and try again. P.180
Setting receive option
Cannot start Receive Option Setting is set to “ON”, so you cannot start. Switch to “OFF” and try
again.
P.263
Setting ticker to ON
Cannot operate “Ticker ON/OFF” is set to “ON”, so you cannot set the i-
α
ppli to the Stand-by
display. Set to “OFF” and try again.
P.307
Situation is similar
Shoot in another situation and store The shooting environment is similar to the one when stored last time, so you could
not store. Change the place and try again.
P.181
Size of data is not supported Data size exceeded the maximum, so you could not download normally. –
Size of page is not supported The size of site or Internet web page is large, so obtaining is suspended, and only
obtained portion is displayed.
–
Size of this page is not supported
SMS in UIM filled The maximum number of SMS messages is stored in the UIM. Delete unnecessary
SMS messages and try again.
P.274, P.378
SMS reports except protected are
deleted All unprotected data files are deleted.
–
Software downloading now
Cannot start You could not start during downloading. After downloading, try again.
–
Software failed Failed to start i-
α
ppli DX. –
Software for this folder deleted
Refer to Open folder The corresponding mail-linked i-
α
ppli has been deleted.
–
Software for this folder exists
Cannot delete The corresponding mail-linked i-
α
ppli is contained, so you cannot delete.
–
Software is stopped because of an
error An error occurred while starting or running i-
α
ppli.
–
Software terminated due to security
error i-
α
ppli DX has forcibly been terminated, because it had tried to perform an
unauthorized operation.
P.297
Software update active
Cannot operate You could not start during updating the software. After the software update is
completed, try again.
–
Software update failed because of
setting All lock During Lock All, so you could not start at the reserved time.
–
Software update failed
because power is OFF The FOMA phone was turned off, so updating the software could not start at the
reserved time.
–
Software update is aborted
Please retry The FOMA phone was turned off during updating the software. Try updating the
software again.
P.456
Software upgraded The target software is not updated, so you cannot execute. –
Some addresses are not valid Some addresses are incorrect. Enter the addresses correctly and send. P.250, P.287,
P.289
Some attached file will be deleted You cannot forward the output-prohibited files from the FOMA phone. –
Message Description Reference
p
You need to obtain a miniSD memory card separately to use the functions related to the miniSD memory card. (See page 337)