Docomo FOMA P702iD, Manual, Page: 363 / 522

361
Other Useful
Functio
ns
Mul
titas
k
The FOMA phone supports “Multitask” that enables you
to use multiple functions at the same time such as menu
functions (see page 34).
By combining Multiaccess and Multitask, you can use
following functions simultaneously (see page 433 for
the combination patterns of Multitask):
You can use maximum three functions and a voice or
video-phone call simultaneously.
■
Mail group
i-mode mail and SMS functions
■ i-mode group
Menu functions inside “i-mode group” on the Main menu
■ Setting group
Menu functions inside “Setting group” on the Main menu
■
Tool group
Menu functions inside “Tool group” on the Main menu
■ Other functions not in the groups
Voice call, video-phone call, 64K data communication, etc.
1
When a function is running
Multitask
Multitask
< >
■
During Multitask
When “Menu icon” of “Menu display
set” is set to “Pattern 1” through
“Pattern 4”, “
” or another mark is
added to the icon of the group that is
being used. When set to “Pattern 5” or
“Customize”, the group appears
framed.
Start Another Function
i-mode group
Tool group
Mail group
Setting group
When a function in the Tool
group is running
2
Start another function.
■ To check usage status of functions
To use icons
“ ” . . . Displayed when a single function is used.
“ ” . . . Displayed when multiple functions are used.
To use TASK MENU
Press .
The menu list for functions in use is
displayed.
You can also switch functions by using
to select a function and pressing
.
■ When you call up a menu function
If another menu function in the same group has already been called up,
the confirmation display appears asking whether to switch the functions.
Select “YES” to close the current menu function and the new menu
function will be called up.
If you try to start up another function when three functions have already
been started up, “Function cannot operate any more” is displayed.
Information
p
When the Stand-by display is displayed, you can press to access
the i-mode menu and to access the Mail menu.
p You are charged a call fee even when you are running other functions
during a call.
p If a call comes in while another function is working, the call might not be
received correctly. In that case, “Record message” or “Call Forwarding
Service” may start in a shorter time than the ring time specified for
them.
p Multitask is not available to transfer data to and from the UIM, miniSD
memory card, another FOMA phone, and a personal computer. To
access the data transfer function, make sure that you close other menu
functions.
p If you use Multitask to switch functions while executing another function
whose load of processing is high, delay may occur in displaying
operation, and so on.