Docomo FOMA P702iD, Manual, Page: 215 / 522

213
Camera
Tex
t Re
ader
You can scan printed phone numbers, mail addresses
or alphanumeric characters such as URLs using the
outside camera, and store them as text information. Use
the text information to make calls, compose i-mode mail,
connect to the Internet, and so on.
You can store eight scanned data items of up to 256
half-pitch characters per item.
The number of characters you can scan at a time is up
to 50 half-pitch characters. Split a lengthy text for
scanning.
1
Text reader Scan text
p You can bring up the display on
the left also by selecting “Text
reader” of “CHG camera-mode”
from the Function menu of the
Finder display.
p When eight codes have already
been stored, the confirmation
display appears asking whether
to overwrite the oldest code.
Select “YES”.
p You can paste the function to
the desktop when you press
( ) and select “Add
desktop icon”. (See page 167)
Text Reader
Using Text Reader
■ When scanning with Text Reader
p Slide the close-up lever to “ ” and start scanning. (See page 206)
p Scan characters with the camera about 8 cm away from them.
The scanning rate is lowered if you scan text off the position about 8 cm.
p Scan so that the camera is in parallel with the characters.
p Scan so that the characters will be in the scanning range.
p After scanning, slide the close-up lever back to “ ”.
Scan Text
At Text Reader start-up Photo light: OFF
< >
Scanning range
Text Reader Selection display
2
Switch to the close-up mode and fit
characters to be scanned to the scanning
range and display them.
p Press ( / ) to
set the photo light to “ON” or
“OFF”.
3
Press .
The characters within the scanning range are scanned. (The shutter
tone does not sound.)
p To cancel scanning, press .
p
When scanning ends, the scanning completion tone sounds and
the Call/Charging indicator lights. The sound level is fixed and
cannot be changed. However, the tone does not sound in Manner
Mode or while “Phone” of “Ring volume” is set to “Silent” or “Step”.
4
Confirm the scanned result.
The scanned characters are underlined. Confirm the scanned
characters for mistakes.
p
Press to restart scanning.
p To store the characters without correcting, go to step 6.
Scanning Text display
Scanned Text Confirmation
display
Scanned result
■ When correcting characters on the Scanned Text
Confirmation display
Select the characters for conversion candidates and correct them.
When the scanned result is displayed, conversion candidates for
each character are displayed up to four kinds.
1. Press
to select a character to be corrected
Press the number for the conversion candidate character.
Enter directly and correct.
Enter directly if you want to correct the character to other than the
conversion candidate.
1. Press
to select a character to be corrected
Press ( ) to switch to “English entry mode” or
“Numeric entry mode” Enter a character.
Information
p When characters you want to correct are alphabet letters, you
can press
to switch between uppercase and
lowercase.
p You cannot enter characters such as “.ne.jp” or “.co.jp” by
pressing .