Docomo FOMA P702iD, Manual, Page: 507 / 522

22
For packet communication, you can specify whether to
notify your caller ID (caller ID notified/not notified). The
caller ID is your important information; so, take a great
care to notify your caller ID.
You can use AT commands (
_ DGPIR command) to
specify “caller ID notified/not notified” before dial-up
connection.
1
Start the communication software such as
“Hyper Terminal”.
p
See page 20 for details on how to operate “Hyper Terminal”.
2
Use the
_
DGPIR command (see page 32) to
specify “caller ID notified/not notified”.
p To automatically add “184 (not notify)” for outgoing or incoming
call, enter the following:
AT _ DGPIR=1
p To automatically add “186 (notify)” for outgoing or incoming call,
enter the following:
AT _ DGPIR=2
3
Confirm that “OK” appears on the display.
Set Caller ID Notified/Not Notified
Information
p
When using DoCoMo Internet access service mopera U or mopera, you
need to set your caller ID to be “notified”.
p If the entered AT command is not displayed, enter “ATE1 ”.
1
“ スタート (Start)” “ すべてのプログラム (All
programs)” “ アクセサリ (Accessories)”
“ 通信 (Communications)” Open “ 新しい接
続ウィザード (New connection wizard)”.
2
When the “ 新しい接続ウィザード (New
connection wizard)” display appears, click “ 次
へ (Next)”.
3
Select “
インターネットに接続する
(Connect to
the Internet)”, then click “
次へ
(Next)”.
4
Select “ 接続を手動でセットアップする
(Manually set up the connection)”, then click
“ 次へ (Next)”.
5
Select “ ダイヤルアップモデムを使用して接続す
る (Use a dial-up modem for connection)”,
then click “ 次へ (Next)”.
■ Specifying “caller ID notified/not notified” in dial-up network
Also by dial-up network setting (see page 22), you can add “186 (notify)”
or “184 (not notify)” to each access point number.
When you specify “186 (notify)” or “184 (not notify)” using both the
_ DGPIR command and dial-up network setting, the caller ID is set as
follows:
p To connect to mopera U or mopera, you need to notify your caller ID.
Set Dial-up Network for Windows
®
XP
Dial-up network
setting (cid = 3) Caller ID notification
setting by
_
DGPIR
command
Notify/Not notify caller ID
_ 99 ___ 3# Not set Notify
Not notify Not notify
Notify Notify
184 _ 99 ___ 3# Not set Not notify
(“184” specified in the dial-up
network has a priority)
Not notify
Notify
186 _ 99 ___ 3# Not set Notify
(“186” specified in the dial-up
network has a priority)
Not notify
Notify