Docomo FOMA P702iD, Manual, Page: 497 / 522

12
5
Enter an access point name.
You can specify any name for the currently created connection.
Enter a plain name in the “
接続名 (Access point name)” field.
p
You cannot enter the following half-pitch characters:
¥, /, :,
_ , ?, !, <, >, |, and ”.
p In the “ 接続先 (APN) の選択 [Select an access point name (APN)]”
field, “mopera.ne.jp” is displayed as the default. Go to the “
接続先
(APN) 設定 [Set an access point name (APN)]” display.
6
Click “ 接続先 (APN) 設定 [Set an access point
name (APN)]”.
“mopera.ne.jp” is registered in “cid1” and “mopera.net” is registered
in “cid3” by default. Click “
追加 (Add)”, then enter the correct access
point name (APN) for FOMA packet communication on the
“
接続先 (APN) の追加 [Add an access point name (APN)]” display.
Click “OK”.
p For a provider access point name (APN), contact your provider.
p The “ パケット通信設定 (Packet communication setting)” display
returns. Select the access point name (APN) you specified newly.
If it is ok, click “OK”.
7
Click “
詳細情報の設定
(Set detailed
information)”.
The display for specifying “ IPアドレス (IP address)” and “ ネーム
サーバ ー
(name server)” appears. When entering dial-up
information for the provider you have subscribed or Intranet LAN
system, specify addresses according to the entry instruction
information, then click “OK”.
8
Click “
次へ
(Next)”.
9
Specify “ ユーザー名 (User name)” and “ パス
ワ ード (Password)”, then click “ 次へ (Next)”.
When specifying the user name and password, correctly enter the
information supplied from your Internet service provider, taking care
of uppercase and lowercase letters and so on.
p Select a user optionally.
10
Put a check mark for “ 最適化を行う
(Optimize)”, then click “ 次へ (Next)”.
p If optimized, the confirmation display to optimize does not appear.
11
Confirm the set information, then click “ 完了
(Complete)”.
The set contents are listed on the display. Confirm that there is no
problem on the set contents, then click “
完了 (Complete)”.
p
To change the set contents, click “
戻る
(Back)”.
p If “ デスクトップにダイヤルアップのショートカットを作成する
(Create a dial-up shortcut on the desktop)” is checked, a dial-up
shortcut will be created on the desktop.
12
Click “OK”.
The setting is completed.
Open the dial-up shortcut icon automatically created
on the desktop; then the connection display for
starting communications appears. After confirming that the
connection starts, you can start the Internet browser or mail browser
for communication. (See page 15)
p To make the optimization valid, you need to restart the personal
computer.