Docomo FOMA P702iD, Manual, Page: 391 / 522

389
Network Service
Ad
ditio
nal
Service
1
While an additional number is displayed
( ) Do the following operations.
You can set a phone number for usual dialing.
1
Multi number
Set multi number
Basic Number . . . . . . . . . . . . . Dials by the contracted phone
number.
Additional Number 1 and 2. . . Dials by an additional phone
number. When the registration
name is changed, each
registration name is displayed.
2
YES
Before making a call, you can select a phone number to
be notified to the other party from a Function menu, and
then make a call.
1
Enter a phone number,
or bring up the detailed display of a
Phonebook entry, redial item, dialed call
record, or received call record.
2
( ) Multi number
Select a phone number
p To cancel the additional phone number, select “Cancel prefix”.
p When you have not signed up for Multi Number, your basic
contract phone number is used for dialing even if you select an
assist number.
You can check a phone number set for “Set multi number”.
1
Multi number Check setting
p After checking, press .
Information
p When you insert another UIM, the Multi Number settings (name, phone
number, ring tone, etc.) are erased. Register them again.
p See page 70 for the display of receiving a call with the additional phone
number.
Function Menu while Additional Number
is Displayed
Function menu Operation/Explanation
Edit Go to step 2 on page 388.
p You can edit also by pressing ( ).
Delete this YES
Delete all YES
Set Multi Number
Information
p
When you make a call from Redial, Dialed Calls or Receive Calls, the
phone number that was previously dialed/received is used for dialing.
Set Own Phone Number when Making a Call
Information
p If you select “Contract number” or “Assist number 1 or 2”, “
:
590 ＃ ”,
“
:
591
＃
”, or “
:
592
＃
” is added after the phone numbers.
Check Setting
You can set a ring tone for calls that come in to the
additional number.
1
Multi number Set as ring tone
Select an additional number
Go to step 2 on page 143.
When the ring tone is set to “Same as ring tone”, the ring tone will be
the one set for “Phone” or “Videophone” of “Select ring tone”.
You can register up to 10 network services when a new
service is provided by DoCoMo.
1
Additional service
Additional service
2
Select <Not stored> ( )
Add new service
3
Enter a service name
Enter number or Enter USSD number
Select either “Enter number” or “Enter USSD number” according to
the service contents you add.
p You can enter up to 10 full-pitch or 20 half-pitch characters for a
service name.
4
Enter either a special number or a service
code (USSD number) YES
1
Additional service Additional
service Select a service
You are dialing the Service Center.
Set as Ring Tone
Setting at purchase Same as ring tone
Additional Service
Using Additional Services
Add New Service
< >
Additional Service List
Information
p You need to check and enter “Special number” or “Service code”
supplied by DoCoMo for using the services.
Special number. . . . . . . . . . . . . . . Number for connecting the Service
Center.
Service code (USSD number) . . . With the FOMA phone, enter it as
USSD. The code is for notifying to
the Service Center.
Use Registered Service