Docomo FOMA D702iF, Manuals

Page: 45 / 451

43
Bef
o
re Using
D702
iF
A message appears or a low battery alert sounds to indicate that the battery level is low. Charging the battery
stops the low battery alert. To stop it immediately, press
f
.
･
In standby, a message indicating low battery appears. The message disappears by pressing
o
,
c
or
f
, but after a period of time, it reappears and the low battery alert sounds. At this time, all the icons on the
top of the screen blink and after approximately 1 minute, the power turns off automatically.
･
During a call, the low battery alert sounds from the earpiece and a message indicating low battery appears.
The message disappears by pressing
o
,
c
or
f
. When approximately 20 seconds elapse after the
low battery alert is heard from the earpiece, the call is cut off and the standby display reappears. Then, after
approximately 1 minute, the power turns off automatically.
Setting the low battery alert not to sound
Low Battery Alert
1
m81165
2
Press
2
･
To set the alert:
1
INFORMATION
●
When the battery almost runs down during a call, even if
OFF
is set, the low battery alert sounds from the earpiece.
Turning the power on/off
Power ON/OFF
･
When FOMA terminal is turned on for the first time, a confirmation screen appears asking whether to
perform Software Update. Note that the battery needs to be charged enough when performing. Please be
sure to refer to “Updating software” before performing.
☛
P391
1
Hold down
f
for over 2 seconds
The wake-up screen appears and then the standby display. The wake-up screen may take some time to
appear.
When the battery almost runs down
Default ON
Turning the power on
Battery level icon
･
If the date and time have not been set, a message appears
indicating that. When FOMA terminal receives the time
information and the time is automatically corrected, the message
disappears. Press
o
to set the date and time manually.
･
If no UIM is inserted, a message appears indicating that
insertion of the UIM is required. Turn the power off, insert the
UIM and then turn the power back on.
･
The following items can be changed:
・
Standby image
☛
P123
・
Battery level icon
☛
P135
・
Time display format
☛
P139
Icon
Received
signal level
Strong Weak Outside the service area
or where radio waves
are hard to reach
is indicated while reading the UIM and
disappears when reading is completed.
Date, day of the
week and time
Received
signal level
The standby
image is
displayed.
P
o
we
r O
N
/O
FF
Next