Docomo FOMA D702iF, Manuals

Page: 300 / 451

298
Di
s
p
lay
ing/
Edi
ting/
Ma
n
a
g
ing Dat
a
Da
ta T
ransf
er
Se
tti
ng
Perform remote control operation with the infrared
data port of FOMA terminal pointed at the infrared
receiver of the supported device used (operating
procedure differs depending on i-
α
ppli). Angle for
remote control is 15 degrees from the center and the
distance is approximately 4 m at the maximum.
However, the angle and distance allowed for the
operation differs depending on the type of devices to
operate and the level of brightness in the environment.
･
The infrared port is on the display side. For smooth
operation, first put your finger on the button, face
the infrared port to the infrared receiver of another
device and then press the button.
Setting operations for data transfer
Data Transfer Setting
Set operations for data transfer by infrared
communication and USB connection.
1
m623
2 Select each item to set
3 Press
p
Making full use of Sound Recorder
Recording sound with Sound Recorder
Sound Recorder
Sound can be recorded using Sound Recorder.
Recorded sound can be played on your FOMA
terminal. It can also be sent together with i-mode
Mail and sent via infrared communication.
･
Recorded sound is saved as video/i-motion
without image.
The date and time recorded is attached to the file
name, display name and the title of the sound file
automatically.
(Example) In case of 12:34:56 on December 5, 2006.
→ 20061205123456
The file format is as follows:
Remote control operation
Default End alert: OFF Auto Authentication: OFF
Ph. book image sending: ON
End alert
：
Specifies whether to sound a communication
end tone at the end of communication.
Auto Authentication ：
Specifies whether to automatically exchange
authentication codes with the other party
while connecting to USB.
･
To set ON , enter the terminal security code
and the 4 to 8-digit authentication codes
for a mobile phone terminal (FOMA
terminal)) and for PC (the other party), and
then press
p
.
Ph. book image sending
：
Specifies whether to send images saved in
the phonebook along with the all phonebook
data when sending all data items.
Infrared receiver
Infrared data port
Approx. 4 m
15 °
15 °
Reading the recording screen
File name/File format
Item Contents
File format MP4 (MobileMP4)
Encoding
method AMR
Extension 3gp
a
Type
Indicates to record sound.
b Indicator
<For during standby for recording>
Indicates the usage rate of the storage area.
<For during recording/pause>
Indicates the rate of the recorded sound size to
the file size set in size restrictions.
c Counter
<For during standby for recording>
Indicates the approximate maximum recording
time of sounds that can be saved in the current
settings.
<For during recording/pause>
Indicates the approximate elapsed/remaining time
(duration until the recording stops).
d
Quality
Indicates the quality of the sound.
☛
P300
e Size restrictions
Indicates the size restriction value of the file.
☛
P300
c
d e
a b