Docomo F-08d, Instruction Manual

Page: 53 / 171

Before using the terminal
51
◆ Security lock
By setting to require authentication on the locked screen,
you can prevent others from misusing the terminal.
You can also use authentication operation set in the
security unlock setting when using Password manager.
❖
Setting screen lock authentication
Set to authenticate on the screen when returning from the
sleep mode.
･
To validate authentication setting for the screen lock, set
security unlock method in advance.
1
From the Home screen,
m
→
[Settings]
→ [Security] → [Screen lock auth] →
Authenticate
❖
Setting security unlock method
Set unlock the screen lock or type of authentication
operation for Password manager.
1
From the Home screen,
m
→ [Settings]
→ [Security] → [Security unlock preference]
2
Authenticate
･
To set for the first time, authentication is not
required.
3
Select an unlock method
Entering pattern to unlock : [Pattern] → Slide like
jointing at least four points vertically, horizontally
and diagonally to enter a pattern
→
[Continue]
→
Enter the same pattern → [Confirm]
･
When you set for the first time, "Securing your
phone"and "Example pattern" appear.
Entering security code to unlock : [Security code]
→
Enter the 4- to 16-digit security code → [Continue] →
Reenter the security code → [OK]
Entering password to unlock : [Password] → Enter the
4- to 16-digit password including alphabets
→
[Continue] → Reenter the password → [OK]
Using combination of fingerprint authentication and
other authentication to unlock : [Fingerprint] →
Confirm that 2 or more fingerprints are registered,
[OK]
→ [Pattern]/[Security code]/[Password] → Set
a pattern/security code/password following the
onscreen instructions
→ [OK]
･
If no fingerprints are registered, register 2 or more
fingerprints following the onscreen instructions.
･
If you have already registered fingerprint and try to
set the security unlock preference for the first time,
fingerprint authentication is required after tapping
[Fingerprint].
Using fingerprint authentication to unlock :
[Fingerprint] → [None] → [OK] → [OK]
･
If no fingerprints are registered, register 2 or more
fingerprints following the onscreen instructions.
✔
INFORMATION
･
For using the fingerprint authentication, check the
precautions and then register your fingerprint
→ P52
･
If you do not want to display the pattern when unlocking
the screen, from the Home screen,
m
→ [Settings] →
[Security] → Tap [Use visible pattern] to unmark.
･
To enable vibration when entering the pattern, security
code, password, or authenticating by fingerprint, from
the Home screen,
m
→ [Settings] → [Security] → Tap
[Use tactile feedback] to mark.