Appendix/Index
145
■
Others
●
Data saved in the USB storage is not displayed.
Reattach the USB storage.
●
When performing fingerprint authentication or
registering fingerprints, "Swipe was too short" or
"Swipe was too slow", etc. appears without
touching the fingerprint sensor.
Possible cause is that the surface of the fingerprint
sensor is wet or condensed of moisture. Wipe water
off with a soft cloth before use.
●
Fingerprint authentication is unavailable when
connecting terminal with a PC, etc.
When connecting the terminal using a USB cable to a
device which requires grounding such as a desktop
PC, make sure that the device is grounded in advance.
If the connected device is not grounded, fingerprint
authentication may be unavailable. In this case,
perform fingerprint authentication while touching a
metallic part (frame, external connector, etc.) of the
connected device or after disconnecting the terminal
from the device.
◆
Error messages
●
Please wait for a while
Displayed when the network access for voice call or
packet communication is restricted. Wait a while and
then operate again.
●
Cannot activate the fingerprint sensor.
Displayed when the fingerprint sensor cannot be
operated normally. When the fingerprint sensor is
unavailable, please contact a sales outlet such as
docomo Shop.
●
Low Battery Level. Shutdown the device.
Battery level is low. Charge the battery.
→
P28
●
Incorrect PIN code! Attempts Remaining
：
X
Displayed when a wrong PIN code is entered. Enter
the correct PIN code.
→
P50
●
Enter PIN code
Displayed when you turn on the terminal with PIN
code enabled. Enter the correct PIN code.
→
P50
●
No SIM card.
Displayed when docomo mini UIM card is not inserted
correctly. Check if the docomo mini UIM card is
inserted to the terminal correctly. If the docomo mini
UIM card is not inserted correctly, calls including
emergency calls (110, 119, 118) cannot be made in
Japan.
Summary of Contents for F-08d
Page 1: ...INSTRUCTION MANUAL...
