Docomo F-08d, Instruction Manual

Page: 109 / 171

File management
107
❖
Removing USB mass storage
･
Do not disconnect the USB cable during data transfer.
Doing so may damage or destroy the data.
1
From the Home screen,
m
→ [Settings]
→
[Storage]
→
[Unmount USB storage]
→
Disconnect the USB cable
◆ Displaying on TV by HDMI
connection
You can display videos, images, browser screen, Media
Player, etc. on a TV.
･
To connect the terminal and a TV with HDMI ports, an
HDMI certified cable (category 2 recommended) with
HDMI micro plugs (Type D) is required (commercially
available).
･
DOCOMO does not guarantee actual operations for all
HDMI devices.
1
Connect the HDMI cable to a TV HDMI port
･
For HDMI connection, switching input, volume
control, etc, refer to the operation manual of the TV.
2
Connect the terminal and the HDMI cable
3
From the Home screen,
m
→ [Settings]
→
[Multimedia]
→
[HDMI settings]
4
Mark [HDMI]
･
If the HDMI cable is unplugged while displaying on
the TV, the terminal turns to connection stand-by
mode for a certain period of time.
Select output resolution : [Output resolution set] →
Select the resolution
Deactivate HDMI output : Unmark [HDMI]
✔
INFORMATION
･
When connecting the TV that does not support HDCP,
images or sounds are not output properly.
･
When starting HDMI output, the TV input may not switch
and images may not be displayed depending on the TV
connected. In that case, switch input via the TV remote
control.
･
The output data from the terminal may not fit the TV
screen depending on the TV connected. In that case,
change the TV display setting.
･
While the HDMI cable is connected, do not hold the HDMI
cable to lift the terminal.
･
When receiving a call, the output ends.
･
When not displaying on the TV, it is recommended to
remove the HDMI cable or to deactivate the function from
the Applications menu,
m
→ [Settings] →
[Multimedia] → [HDMI settings] → Unmark [HDMI].