Appendix/Index
142
●
The terminal becomes hot while charging and the
power turns off.
If you activate several applications, use camera,
connect to the Internet for a long time while charging
the battery, etc., temperature of the terminal may be
raised. When the terminal is in high temperature state
for a long time, the power turns off preventing you
from burns.
●
The display is dim.
Check the screen backlight setting.
→
P85
●
The clock is not on time.
The clock time may become wrong while turning on
the power for a long time. Check that Date & time
setting is [Automatic] and then turn OFF and ON the
terminal in a place with good signal conditions.
→
P92
●
Terminal operation is unstable.
Instability may be caused by application that you
installed after purchasing the terminal. If the symptom
is improved when you boot the terminal in safe mode
(function for booting in near default state),
uninstalling the installed applications may improve
the symptom.
Boot the terminal in safe mode by the following
method.
With the power of terminal OFF, press and hold
X
for
2 seconds or more, and then press and hold
m
from when the Disney mobile logo display ends until
the Home screen appears. When safe mode is booted,
[Safe mode] is displayed at the lower left of the Home
screen. To exit the safe mode, turn power OFF and
then ON.
*
Back up the necessary data before using safe mode.
*
Some widgets that you created may be removed.
*
Safe mode is not a normal booting state. To use ordinarily, exit
the safe mode.
●
Operations are not possible when tapping the
screen.
• Do you operate with a gloved hand?
• Do you operate with a fingernail or foreign object
on the screen?
• Is protective sheet or seal affixed on the display?
Depending on the type of protective sheet,
operations may not be performed correctly.
• Do you operate with the touch panel wet or with
your finger wet with sweat or water?
• Do you operate under water?
• Touch the screen with your finger directly to
operate the terminal.
●
Operations are not possible even though the power
is turned ON.
Is the PIN code entry screen displayed?
→
P50
●
Operations are not possible even though the lock is
canceled.
Is the security lock set?
→
P51
●
Operations are slower/Application operation is
unstable/Some applications are not activated.
Operation becomes unstable if the terminal is low on
memory. When a message indicating the memory
space is short is displayed, delete unnecessary
applications.
→
P119
●
Data is not displayed normally/Normal touch panel
operations are not possible.
Turn the terminal ON and OFF.
→
P31
Summary of Contents for F-08d
Page 1: ...INSTRUCTION MANUAL...
