Applications
129
◆
Precautions on using Osaifu-Keitai
･
The data (including electronic money, points, etc.) in the
IC card may be lost or modified because of the
malfunction of the terminal (When we take your Osaifu-
Keitai for repair etc., as we cannot take it with data
remained, you are required to erase the data by
yourself). For support such as reissuance, restoration,
temporary preservation or transfer of data, contact
Osaifu-Keitai compatible service providers. For
important data, be sure to use an Osaifu-Keitai
compatible service with backup service.
･
If the data in the IC card is lost, modified or damaged by
any means related to Osaifu-Keitai compatible service
such as malfunction or model change, DOCOMO
assumes no responsibility for the loss of data.
･
If the terminal is stolen or misplaced, immediately
contact Osaifu-Keitai compatible service provider for an
advice.
◆
Using Osaifu-Keitai
1
From the Applications menu, [Osaifu-Keitai]
Service information is acquired to refresh the service
list.
･
For the first activation, make initial settings
following the onscreen instructions.
2
Select a service
3
Set up the service
･
Make the required settings from the service site or
application.
◆
Holding Osaifu-Keitai over card
reader
You can exchange data with an IC card reader only by
holding
mark over the card reader.
･
Hold
mark horizontally over the center of the IC card
reader. If the mark cannot be scanned even with it held
in front of the center of the scanner, slightly lift up the
terminal, or move it backwards/forwards or to the left/
right. When holding the terminal to the scanner, note
that
mark is not in the center of the terminal, but
near the camera.
･
mark sometimes cannot be scanned if there is a
metal object between the mark and the scanner. Also,
note that stickers or other objects near
mark might
affect communications performance.
IC card reader
mark
Summary of Contents for F-08d
Page 1: ...INSTRUCTION MANUAL...
