DK-Technologies PT5300, Manual To Installation And Operation

Page: 41 / 90

PT5300 | 35
Operation:
• In the CONFIG submenu use the
and buttons to select RESET PASSWORD and press the button to
enter the RESET PASSWORD submenu.
• To reset the user name and password to default use the
and buttons to select OK and press E.
–
The user name will be reset to Admin and the password will be reset to 2730 .
–
The user name and password is case sensitive.
–
The user name and password can each have a length of 16 characters.
–
The user name and password can be configured from the PC software PT5300.
–
Please see section 10 for further information about the NetFinder protocol and PT5300.
• If no change is desired, move the cursor to ESC and press .
Leaving the function takes you back to the CONFIG submenu.
4.7.6 Menu: PRESET
MENU:PRESET, select function
SUBMNU:<RECALL> STORE NAME ...
To recall the Preset, select RECALL
SUBMNU:PRESET/RECALL select
RECALL (PRESET 1) OK ESC
Operation:
• Use the
and buttons to select preset.
• When the desired preset appears in the display, move the cursor to OK and press E.
• If no change is desired, move the cursor to ESC and press .
Leaving the function takes you back to the PRESET menu, or if a preset is recalled the Preset Status display will be
activated
Whenever a recall is activated, it will apply to the generator until a value in the operation is altered. If a preset has
been canceled, the only way to activate it again is to recall the preset.
If a preset is active when you enter the submenu, the submenu will show the selected preset; otherwise Preset 1 will
be selected.
When using the PRESET button:
• If a preset is active, pressing the PRESET button will bring up the recall [number], the number in brackets
being the preset currently active.
• If no preset is active, pressing the PRESET button will bring up ”Recall [1]”
• The PRESET button, if you press it repeatedly, will act like the up button, i.e. the next preset is selected.