DK-Technologies PT5300, Manual To Installation And Operation

Page: 74 / 90

68 | PT5300
OUTPut commands
OUTPut:BB1:SYSTem
OUTPut:BB2:SYSTem
Command to select the system of the standard Black Burst module. Systems available are:
System: Description:
PAL PAL
PAL ID PAL with line 7
NTSC NTSC with setup
Example:
OUTP:BB1:SYSTPAL ID
set system for BB module 1 to PAL with line 7 pulse
OUTP:BB1:SYST?
response: PAL ID
OUTPut:BB1:DELay
OUTPut:BB2:DELay
Command to set the delay of the standard Black Burst module. The delay is defined by three parameters:
< Field > , < Line > , < HTime > where < Field > sets the field offset, < Line > sets the line offset and < HTime > sets the
horizontal time in ns, i.e.
•
HTime(PAL) < 64000.0ns
•
HTime(NTSC) < 63492.1ns
Note: It is not possible to select a delay outside the range of the selected system. See table below:
Analog
PAL, 625 Lines NTSC, 625 Lines
Field: Line: Field: Line:
-3 -0,..,-312 - -
-2 -0,..,-311 - -
-1 -0,..,-312 -1 -0,..,-262
-0 -0,..,+311 -0 -0,..,-261
+0 +0,..,+312 +0 -0,..,+262
+1 +0..,+311 +1 -0,..,+261
+2 +0..,+312 +2 +0
+3 +0..,+311 - -
+4 +0 - -
Example:
OUTP:BB2:DEL-0,-0,-3245.2
set delay for BB module 2 to -2 field, -4 line & -3245.2ns
OUTP:BB2:DEL?
response: -2,-004,-03245.2
OUTPut:BB1:SCHPhase
OUTPut:BB2:SCHPhase
Command to set the ScH-Phase of the standard Black Burst module. The ScH-Phase value must be in the range:
-179
< SCH-Phase < =+180