DK-Technologies PT5300, Manual To Installation And Operation

Page: 46 / 90

40 | PT5300
To change the output test signal pattern, select PATTERN.
To change the LEVELS of the test signal pattern, select levels.
Operation:
• Use the
and buttons to change the pattern selected
• Changes of the pattern are instantaneous, i.e. any changes are reflected immediately in the output signal
• When the desired pattern appears in the display, move the cursor to SAVE and press E to store the setting
• Move the cursor to that position, to enable access to a menu below. In this menu the default test pattern can
be modified
• If no changes are desired, move the cursor to ESC and press .
Leaving the function takes you back to the HD-SDI/HD1 select submenu.
It is possible to enable user text in the pattern. The user text can be entered for the standard patterns, e.g. color bar,
crosshatch, etc.
To change the text inserted in the test pattern, select TEXT.
2NDMNU: ../HD1/TEXT, select
2NDMNU:<EDIT> SCALE POS MOVEMENT ...
2NDMNU: ../HD1/TEXT, select
2NDMNU:<TEXT COLOR> BACKGROUND COLOR ...
Operation:
• Use the and buttons to select the item to change.
• Then press the
button to enter the 2nd menu to change the selected item. To change the output text
inserted in the test pattern, select EDIT.
2NDMNU:../TEXT/EDIT, select
LINE1:<TEXT1> OFF SAVE ESC
Operation:
• Use the
and buttons to select one of the 3 text lines to edit.
• To open the text line for editing, place cursor on text field and press E
• Use the button to delete characters while backspacing.
• Scroll through the characters with the
and buttons. The characters being edited will flash during the
editing process.
• When the desired character appears, use the
button to move to the next character to be inserted.