46
| PT5300
Operation:
• Use the
and
buttons to change the audio signal selection.
• Changes to the audio signal are instantaneous, i.e. any changes are reflected immediately in the output
signal.
• When the desired audio signal appears in the display, move the cursor to SAVE and press E to change the
setting.
• If no changes are desired, move the cursor to ESC and press .
Leaving the function takes you back to the AES-EBUx menu.
AES/EBU level options:
•
Silence
•
0 dBFS
•
-9 dBFS
•
-12 dBFS
•
-14 dBFS
•
-16 dBFS
•
-18 dBFS
•
-20 dBFS
Note:
If you select silence, the data bit indicating stereo, mono, or dual sound will continue to be active.
To change the phase timing of the AES/EBU audio data, select TIMING.
2NDMNU:../AES-EBUx/TIMING, select
TIMING:<PAL> SAVE ESC
Operation:
• Use the
and
buttons to change the audio signal selection.
• Changes to the audio signal are instantaneous, i.e. any changes are reflected immediately in the output
signal.
• When the desired audio signal appears in the display, move the cursor to SAVE and press E to change the
setting.
• If no changes are desired, move the cursor to ESC and press .
Leaving the function takes you back to the AES-EBU menu.
AES/EBU audio timing options:
•
PAL
•
NTSC Phase 1
•
NTSC Phase 2
•
NTSC Phase 3
•
NTSC Phase 4
•
NTSC Phase 5
Summary of Contents for PT5300
Page 6: ......
Page 59: ...PT5300 53 4 9 Menu Tree Figure 7 PT5300 Menu tree ...
