DK-Technologies PT5300, Manual To Installation And Operation

Page: 39 / 90

PT5300 | 33
• The MAC address submenu will show the MAC (Media Access Control) address assigned to the unit. This
address is globally unique and the first part of the address will always start with 00:0b:3c.
• Use the buttons to exit the menu.
Leaving the function takes you back to the ETHERNET submenu.
View NetFinder name:
2NDMNU:../NETWORK/ETHERNET
Unnamed. <ESC>
Operation:
• In the ETHERNET sub menu use the
and buttons to select NETFINDER and press the button to enter
the NetFinder submenu.
–
The NetFinder submenu will show the user assigned name of the PT5300.
–
The NetFinder name can be up to 32 characters long.
–
The Netfinder name is on the network used by the PC software PT5300 to easily distinguish multiple
PT5300s from each other.
–
The NetFinder name cannot be changed locally. It must be changed from the PC Software PT5300.
–
The NetFinder name is not visible if an Ethernet link has not been established.
–
Please see section 10 for further information about the NetFinder protocol and PT5300.
•
Use the buttons to exit the menu.
Leaving the function takes you back to the ETHERNET submenu.
Network configuration:
• In the NETWORK menu, use the
and buttons to select CONFIG.
SUBMNU:NETWORK, select
ETHERNET <CONFIG> ESC
• Then press the
button to enter the CONFIG submenu.
2NDMNU:../NETWORK/CONFIG
<TELNET> PORT RESET PASSWORD ESC
The following options are available in the CONFIG menu:
• TELNET - Enable or disable the Telnet Server.
• PORT - View the Telnet port number.
• RESET PASSWORD - Reset the network user name and password to default.