DistyNotruf
pro
Ascom, operating instructions
Charging
Charging takes approximately 4 hours for a complete charging cycle.
Power supply plug:
•
5 VDC, 500 mA (Type Europlug KA 1504001)
•
Operating temperature: 0 °C to + 35 °C
•
Storage temperature: - 20 °C to + 60 °C
Operating display
Operating status can be read on the LEDs.
Mode
LEDs / Acoustic
1 Plug into power supply
“Beep” tone, red LED illuminates once
2 Remove from power supply
Abort charging: red LED goes off
3 Charging (DECT activity on)
5
Red LED flashes during charging and turns off when
charging is completed
( Flash rhythm: every second )
Green LED as in 6) / 7) / 8)
4 Charging (DECT activity off)
Red LED flashes during charging and turns off when
charging is completed
( Flash rhythm: every second )
Green LED is off
5 Charge status low
Red LED flashes once in every 30 seconds and beep
tone
6
6 Subscribed, registered
Green LED flashes once in every 10 seconds
7 Subscribed, out of range /
searching for base station
Red LED flashes every second
8 DECT connection
Green LED is switched on
9 Alarm
Red LED flashes once in every 0.5 seconds
10 Range (Limit)
Red LED flashes fast. Warning tone
11 Status on delivery (Default),
Press of button
Red and green LED on
12 Programming through DTMF
Green LED flashes
5 depending on setting
6 Tone stops after 5 min.
Page 21 of 24
