DistyNotruf
pro
Ascom, operating instructions
Performance characteristics
(features)
For setting or activation through ‘disty Programmer App’, see preceding chapter.
Exchange of messages via SMS and the Beacon service are possible only during operation
with ASCOM facilities.
Emergency call (default: disabled)
If the button is pressed for longer than 3 seconds in a normal state, a link will be established
with a programmed number; the red LED flashes. That is a speech connection.
This can be terminated only by pressing the button again.
If a
distyNotruf pro
is called, which has no emergency number set, then it stores the
callers identity (CLIP
2
) as emergency number.
Announcement (Call)
If a call is made through any random number, the
distyNotruf pro
builds-up the
connection immediately. The loudspeaker and the green LED are switched on and a brief
tone informs the bearer that an audio connection has been established with the caller.
Volumes
Following volumes can be adapted:
•
loudspeaker 8 steps
•
ringing tone 4 steps
•
bell tone
4 steps
•
microphone 16 steps
2 CLIP = Calling Line Identification Presentation
Page 12 of 24
