DistyNotruf
pro
Ascom, operating instructions
Shock sensor
Not active
Hospital
Not active
Authentication code (AC)
(up to eight digits)
0000
PIN
0000
Beacon-service (ASCOM
location device 9dLD)
Not active
Special location alarm (Beacon-
service)
Not active
SMS on low battery
Not active
Ring tone
Active
Personal alarm (Alarm button
acts as on a ASCOM-Handset
and sends a SMS)
Not active
Note:
Alternatively, default status can be established through the programming station.
Requesting/Setting parameters & Functions
Parameters can be configured in the
distyNotruf pro
using the programming adapter that
can be ordered as accessory.
The following is a description of the handling.
With the power supply
programming function
(PS), the battery of the
distyNotruf pro
can
either be charged or some settings modified through data transmission.
A PC with USB connection is required to use the PS for the setting of parameters.
The PS will now be connected to the PC through a USB cable and a programming adapter.
Note:
If applicable, the installation of a driver ( = Virtual Com-Port ) may be
required ( CDC driver,
USBLadestation.inf
).
The
distyNotruf pro
is not plugged during installation.
The programming tool ( ‘disty Programmer App’ ) can be downloaded from the homepage
of the company Disty. Save it in a folder of your choice and activate it. A window will
appear with the question:
Execute
or
Cancel.
Clicking on
Execute
will open up the operating
program.
Page 9 of 24
