DistyNotruf
pro
Ascom, operating instructions
It is fixed in factory settings that DECT activity turns off when the
distyNotruf pro
is in the
CS.
If the device is configured in such a way that DECT operation is continuously active, the
meaning of the green LED during charging as stated in the above table will be maintained.
Moreover, the respective SMS is then sent to the control center (UCM/Elise) while plugging
into the CS or removing from the CS.
If DECT activity is off, DECT operation will be stopped during charging. Moreover, no SMS
will be sent as described above.
The LEDs have a different meaning if operated during a programming session.
Mode
LEDs
Device is plugged in the programming
station and is ready for data
transmission
Green and red LED illuminate
Package list
The following items will be found together with the
distyNotruf pro
in the box.
•
distyNotruf pro Ascom
•
two spring bars (
mounted
)
•
Bracelet (
mounted
)
•
Belt clip
•
Neckband
•
Users brief manual
•
Card box
•
Power Supply and Cable
Page 22 of 24
(example!)
