DistyNotruf
pro
Ascom, operating instructions
Call setup (with OAPT – interface)
Call
setup
SMS: if a SMS with the content
(PTP)CS;A=12345;S=0
is sent to the
distyNotruf pro
, it calls the subscriber 12345.
With an additional parameter only the microphone is enabled. No optic/acoustic indication
will be observed at the
distyNotruf pro
, when a SMS with this parameter setting is sent.
Please use with caution!
•
(PTP)CS;A=12345;S=0 -> normal
•
(PTP)CS;A=12345;S=1 -> silent (microphone only)
•
(PTP)CS -> release call
Setting through DTMF
Different parameters can be alternatively set with the help of the DTMF technology. Speech
contact is first established with the
distyNotruf pro
for this purpose and the remote
subscriber sends the respective sign.
After recognizing the desired setting, in this case the introductory sign ‘**9’, a one-minute
countdown begins for the modification of the desired parameter.
Following successful programming, a positive acknowledgment tone will sound and the
connection will be terminated.
Only one parameter can be modified.
•
Authentication Code ( AC ) '
* * 9 pin 5 <ac> #
'
( ac = 0..9, 4-/ 8- digits )
•
Volume of loudspeaker
'
* * 9 pin 1 <Volume value> #
'
( Volume value = 1 .. 5 )
•
Volume of ringing tone
'
* * 9 pin 4 <Volume value> #
'
( Volume value = 1..2 )
•
Emergency call number
'
* * 9 pin 2 <Calling number>
3
#
'
( Calling number max. 20 digits )
•
Shock sensor
4
'
* * 9 pin 3 <Value> #
'
( Value = 0: Off,
1: Man down alarm,
2: Moved after timeout )
pin: 4 digits. Required only if it is not 0000.
3 1st number = * internal, = # external number
→
→
4 Timeout = 2 minutes
Page 16 of 24
