Dish Network DuoDVR ViP 622, User Manual

Page: 122 / 170

Connections and Setup
113
Connecting a Broadband Internet Connection
1
Press MENU, then select System Setup, Installation, and then Phone System.
2
Select the Touch Tone or the Rotary Phone option in the Phone Type list.
3
Select either the No Prefix or the Prefix Code option in the Outside Line Prefix list.
Note: Usually, you need a telephone number prefix only for business installations. For
most residential installations, all you need to do is set the telephone system type. The
default setting of No Prefix will allow correct dialing. If this is the case, select the Save
option to save the above setting, and stop here. If you do need to set a prefix, then instead
of selecting the Save option, go on to step 5.
4
If you selected No Prefix, select Done.
5
If you selected Prefix Code, the receiver highlights the box where you must enter the
exact sequence used when dialing an outside line.
6
Select Done.
C
ONNECTING A
B
ROADBAND
I
NTERNET
C
ONNECTION
If you have broadband (high-speed) Internet access at home, connect your receiver to
your home network. You can use this connection to order Pay-Per-View programming
using your remote control if you are not able to connect a telephone line. It also provides
access to additional content not usually available through your satellite TV subscription.
Refer to www.dishnetwork.com/support and select Connect to Broadband for detailed
instructions on methods for making this type of connection.
C
ONNECTING
U
SING
D
ISH
COMM
DishCOMM is a robust network technology based on the HomePlug 1.0 standard that
allows compatible DISH Network satellite receivers to send and receive data via the power
lines in your home.
DishCOMM allows one or more receivers to "share" another receiver's phone connection
(see step 4, below), or to use a DishCOMM Modem connected to the phone line (see step
5, below), which eliminates the need for a physical phone-line connection to a receiver.
DishCOMM-compatible receivers also can use a HomePlug-to-Ethernet Adapter (if it is
HomePlug 1.0 or HomePlug Turbo compatible) to connect to a broadband home network
for additional features. See Connecting a Broadband Internet Connection on page 113.
Creating a DishCOMM Network
To enable communication between DishCOMM-compatible receivers and DishCOMM
equipment, you must create a DishCOMM Network. Create a DishCOMM Network by