Dish Network DishPro, User Manual

Page: 19 / 139

Page 17
Chapter 3
Using the System
Using the System
B
ACK
P
ANEL
C
ONNECTIONS
For information on wiring, and wiring diagrams, see the installation
instructions in
Chapter 4 . It includes information on installing multi-dish
setups and switches.
S
ATELLITE
Connect the coaxial cable from the satellite dish to the receiver using this
input.
TV S
ET
O
UT
C
ONNECTION
The back panel TV Out connection provides good video and mono
(non-stereo) audio quality.
TV A
NTENNA
/C
ABLE
I
N
If you connect a cable TV box or a broadcast TV antenna to the receiver, use
the back panel
TV Antenna/Cable In
connection for the local signal.
P
HONO
(RCA) A
UDIO
/V
IDEO
O
UTPUTS
The back panel phono (RCA) audio/video outputs provide good picture
quality and stereo sound. If the TV has only one input for this type of audio,
connect it to the right (
R
) phono (RCA) audio output on the receiver.
If you use the phono (RCA) audio/video outputs to connect the receiver with
other devices, you may need to use the menus displayed by each device to
Tighten the
coaxial cable
connections only
by hand.
Tip: If you connect
a VCR to the
receiver, you must
also set both the
VCR channel
switch and
viewing channel
to this same
channel.